Rocket Research Paper

Key concepts
Physics
Aerodynamics
Flight
Stability

Introduction
Blast off! Have you ever played with a model or toy rocket, or seen a real rocket launch on TV? In this project you will make simple rockets out of paper and launch them by blowing into a drinking straw. Can you make the rocket that flies the farthest?

Background
All flying objects, from rockets to airplanes to birds, have something in common—they need to remain stable when they fly. You are probably pretty familiar with what "stability" means for objects on the ground. Did you use training wheels when you learned how to ride a bike? Training wheels help keep the bike stable so you do not fall over. The same concept applies to things that fly. They need to stay pointed in the same direction when they fly forward, without spinning or tumbling, which could cause them to crash.

You may have noticed that rockets and missiles usually have triangular fins at their bases. The same applies to other long, skinny objects that fly through the air quickly, such as arrows. What purpose do these fins serve? Can they help the rockets fly better? Try this project to find out!

Materials

  • Two pieces of paper
  • Scissors
  • Pencil
  • Drinking straw
  • Scotch tape
  • Ruler
  • Clear space in which to launch your "rockets," such as a large room, hallway or outdoor area with no wind
  • Measuring tape (optional)

Preparation

  • Gather all of the materials you will need for the activity.

Procedure

  • Cut one piece of paper into four smaller rectangles, by cutting it in half lengthwise and widthwise. This will allow you to make four rockets.
  • Wrap one of the paper rectangles around a pencil to form a cylinder, with the long edge of the paper along the length of the pencil.
  • Tape the cylinder closed so it does not unravel (but do not tape it to the pencil).
  • Slide the cylinder off the pencil. Pinch one end of the cylinder shut and seal it with tape. (This is the "front" end of your rocket.) Leave the other end open. This will be your first rocket, with no fins.
  • With plenty of room in front of you—and no obstructions, such as furniture or people—prepare to launch your first rocket! Slide it over a drinking straw. Aim the straw forward, then blow into it as hard as you can. Watch your rocket as it flies. How far does it go? Does it fly straight or does it tumble in midair?
  • Launch your rocket a few more times to see if it flies the same way. If you would like to record your rocket flight distances, be sure to launch it from the same place each time, and measure to the landing spot with a tape measure.
  • Make another paper rocket following the previous steps. Remember to pinch one end and tape it shut.
  • For this rocket, however, you will make fins. Cut out two right triangles (with a 90-degree angle in one corner) from the other piece of paper. The long sides of the triangles should be about eight centimeters. You will fold each triangle to make two fins, so you will have four fins total.
  • Draw a line that splits one triangle in half (from the 90-degree corner to the middle of the long side of the triangle).
  • Draw two lines parallel to the first line (one on each side), about five millimeters away from it.
  • Now, fold the triangle up along these two lines. The result should be two triangles sticking up in the air (the fins), with a flat part connecting them in between.
  • Tape the flat part to the side of your cylinder, toward the open end (the base, or bottom, of your rocket).
  • Repeat these steps for the other triangle, and tape it to your cylinder on the opposite side of the first one. The result should be four fins that form a "+" shape when you look at the rocket from either end. If necessary, bend the fins so they are spaced out 90 degrees apart from one another.
  • Slide the new rocket onto the drinking straw and launch it. How far does this rocket go? How does its flight compare with your first finless rocket? Does it go farther? Does it tumble or does it fly straight? Do you think fins help the stability of your rocket?
  • Launch it a few more times. If you are measuring the flight distance of each rocket, use a tape measure and record how far it flew.
  • Extra: Try different numbers of fins. For example, what happens if you only use two fins instead of four?
  • Extra: Try different shapes for fins. For example, what happens if you make semicircular fins instead of triangles?
  • Extra: Try attaching the fins at different points along the length of your rocket. Do the fins still work if you put them in the middle or front of the rocket instead of the back?


Observations and results
You should have seen that your finless rocket flew straight at first but quickly spiraled out of control. It might have tumbled through the air and fluttered to the ground, almost like a leaf falling from a tree. This is because the rocket did not have fins to keep it stable. If it started turning just a little bit, then it would start turning even more rapidly until it completely lost control. In contrast, your second rocket that had fins should have flown straight, and traveled much farther as a result. This is because the fins help keep the rocket stable, or pointed in the same direction. If the rocket turns a little bit, the fins help turn it back in the original direction.

More to explore
How to Make a Soda-Straw Rocket, from NASA
Rocket Aerodynamics, from Science Learning
Stability Science: How Tails Help a Kite Fly, from Scientific American
Soaring Science: Test Paper Planes with Different Dragfrom Scientific American
Science Activities for All Ages, from Science Buddies

 

This activity brought to you in partnership with Science Buddies

Paper Rockets

SUBJECT: Rocketry

TOPIC: Stability

DESCRIPTION: Small flying rockets to make out of paper and propel with air blown through a straw.

CONTRIBUTED BY: Gregory Vogt,OSU

EDITED BY: Roger Storm, NASA Glenn Research Center

 

MATERIALS:

  • Scrap bond paper
  • Cellophane tape
  • Scissors
  • Sharpened fat pencil
  • Milkshake straw (slightly thinner than pencil)

PROCEDURE:

  1. Cut a narrow rectangular strip of paper about 5 inches long and roll it tightly around the fat pencil. Tape the cylinder and remove it from the pencil.

     

  2. Cut crown points into one end of the cylinder and slip it back onto the pencil.

     

  3. Slide the crown points to the pencil tip and squeeze the points together and tape them together to seal the end to form a nose cone (the pencil point provides support for taping). An alternative to the crown points is to just fold over one end of the tube and seal it with tape.

     

  4. Remove the cylinder from the pencil and gently blow into the open end to check for leaks. If air easily escapes, use more tape to seal the leaks.

     

  5. Cut out two sets of fins using the pattern and fold according to instructions. Tape the fins near the open end of the cylinder. The tabs make taping easy.

     

FLYING THE PAPER ROCKET:

Slip the straw into the rocket's opening. Point the rocket towards a safe direction, sharply blow through the straw. The rocket will shoot away. Be careful not to aim the rocket towards anyone because the rocket could poke an eye.

DISCUSSION: Paper rockets demonstrate how rockets fly through the atmosphere and the importance of having fins for control. For experimental purposes, try building a rocket with no fins and one with the fins in the front to see how they will fly. Practice flying the rockets on a ballistic trajectory towards a target. Also try making a rocket with wings so that it will glide.



Return to Rocket Activities
Return to Aerospace Activities Page
Rocket Stability
Rocket Center of Gravity
Rocket Center of Pressure


Aerospace Education Services Project
Oklahoma State University

0 Replies to “Rocket Research Paper”

Lascia un Commento

L'indirizzo email non verrà pubblicato. I campi obbligatori sono contrassegnati *